Adapter for fitting router motors to our Router Lifts RL1.0 & RL2.0 with 43 mm clamping nackBy means of this adapter  a mounting adapter for the router lifts, motors such as Suhner, Mafell, AMB and Kress can now be used perfectly on previous  lift constructions. Perfect holding force due to perfect form closure. No routing depth loss, simple cutter change above the table top.  - Genuinely Made in Germany! Technical data: Clamping neck Ø 43 mm/ Tolerances of the motor neck -0,135 + 0,015Required clamping height of the motor: 20 mmMax. Weight of the motor: 5 kg NOTE: Use is only permitted in combination with RL1.0 or RL2.0.Not suitable for RL2.0-MINI Further advantages and characteristics:No loss of routing depth! Easiest cutter change thanks to the spindle and collet still looking out from above! Quality from Germany - first-class, solid construction. Construction made of high-quality steel.Installation made easy - Simple installation of the adapter on the milling lift (installation instructions enclosed).No need to drill your own holes - mounting holes for quick installation are already provided. Approved motors:Kress: 530 FM, 800 FME, 1050 FMEMAFELL: FM 1000SUHNER: UAC 30 RF, UAD 25 RF, UAK 30 RF, UAL 23 RFIf your motor is not listed, please check the tolerances of the clamping neck to your model as specified by the manufacturer or contact us.Not approved: Trend T4EK Delivery includes :1x adapter AD43, mounting screws and washers,mounting instructions

Suitable for all RL router liftsProduct details:Easy and precise adjustment of the desired routing height on the router lift For all IP router lifts Anodised aluminium crank handle Hexagon wrench size 5 Dimensions (L x W x H): 52 x 21 x 40 mm Made in GermanyDelivery includes:1x hand crank

For levelling of router lifts and insert platesDimensions of the frame: Outside: 305x228 mm Thickness: 1 mm Radius: 6 mmApplication note: The sheet steel frame is inserted into the rebate of the table cut-out for the mounting plate or the router lift. With the levelling screws, which are included in the delivery of the IP plate or the RL lift, the insertion plate is aligned with the router table.

For levelling of router lifts and insert platesDimensions of the frame: Outside: 298x235 mm Thickness: 1 mm Radius: 19,05 mmApplication note: The sheet steel frame is inserted into the rebate of the table cut-out for the mounting plate or the router lift. With the levelling screws, which are included in the delivery of the IP plate or the RL lift, the insertion plate is aligned with the router table.

20-piece set made of high-quality aluminiumProduct details:Perfectly matched accessories for quick installation and removal of the RL router lifts and IP insert plates in the router table. The installation and removal is conveniently carried out from above, an additional counter below the router table plate is not necessary.High-quality design made of solid aluminiumAdditional reinforcement of the router table top at the corners of the cut-out for RL and IPDelivery Includes:4x aluminium corner plates 4x countersunk screws M6x50 12x screw DIN7997 4,5x40

Accessory kit for RL router lifts and IP insert platesProduct details:Precise guidance and safe routing - even without rip fenceUniversal for all insert plates or router tables with 1/4 inch threaded boreDirectly compatible with all RL router lifts and IP insert platesHeight-adjustable protective shield made of stable acrylic glassMax. routing height with the protective shield: 85 mmQuickly mounted, without drilling or further adjustmentsMade in GermanyDelivery includes:Safety guardTrimming pin

Vacuum adapter DustRouter from MilescraftTechnical data:Universal fitEasy assemblyStandard hose size (Ø 38 mm; for attachment to workshop vacuums and suction systemsFits all MarMan-Tools insert plates and router liftsDelivery includes:1x long suction hose (890 mm), 1x short suction hose (500 mm), 1x suction cap, 1x T-connector (with plug), 3x Velcro mounting ring, 1x connector to rip fence, 1x mounting strip, 1x connector to suction cap, 7x mounting screws