Router lift RL3.0K (Kreg-format) with steel reduction plates 16, 32 & 68 mm Experience the revolutionary, pivoting RL3.0K router lift—the first and only of its kind with a precise swivel range from -5 to 50 degrees, ideal for routers with a 43mm clamping collar. This robust and high-quality masterpiece combines professional table router technology in a compact format, perfect for small workshops or as a complement to a full-sized table router. Trust in true craftsmanship "Made in Germany" and benefit from quick setup and configuration times!Product details:Pivoting router lift from -5 degrees to 50 degrees - the first and only one of its kind! Quality "Made in Germany": construction made of high-quality aluminium and steel. For router motors with 43 mm clamping neck Classic snap-in guide points: 22.5°, 30°, 45° and 90° No loss of routing depth! Easy router bit changing, thanks to upward looking routing spindle and collet chuck Countless routing possibilities: grooves, rebates, chamfers, mitre cuts, and much more - and all this with only one slot routing cutter Height fine adjustment to 1/10mm: extremely precise adjustment, with exact scaling and effective spindle lock, conveniently operated via hexagon socket screw. Smooth-running spindle columns: allow continuous and exact fine height adjustment. Routing without rip fence: 2 drill holes for the rip fence pin enable free routing of e.g. round workpieces without rip fence. Absolutely flat: easy leveling of the RL3.0K  using leveling screws in the insert plate. Laser scaling: millimetre scale on the surface for exact alignment of the rip fence.Easy to use:Height adjustment via rotary handle above Angle locking via a lever below Centering in the slotted hole by means of two levers below Additional recessed grip for easy changing of the reduction plates. Magnetism for attaching further accessories is distributed over the entire reduction plate. No own drillings necessary: mounting holes (countersunk head) for quick router table installation are already pre-drilled. Compatible router motors: Kress: 530 FM, 800 FME, 1050 FME Mafell: FM 800, FM 1000 Suhner: UAC 30 RF, UAD 25 RF, UAK 30 RF, UAL 23 RFNote: Not compatible with Trend T4EK.If your routing motor is not listed, please check the tolerances of the clamping neck specified by the manufacturer for your model or contact us. Technical data:Dimension insert plate: 298 x 235 x 243 mm Corner radius of insert plate: 6 mm Height adjustment per rotation: 4 mm Max. adjustment travel: 101 mm Height router lift (max. extended): 240 mm Max. router bit diameter: 55 mm Weight: approx. 5 kg Scope of delivery: 1x router lift RL3.0K 2x reduction plates oblong hole Ø 16 and 32 mm1x reducing plate Ø 68 mm 1x hexagon screwdriver 5x150 mm 4x fixing screws M6x50, washers and nuts 8x leveling screws M5x8 1x instruction manual

Router lift RL3.0 with steel reduction plates 16, 32 & 68mmExperience the revolutionary RL3.0 pivoting router lift – the first and only of its kind with a precise swivel range from -5 to 50 degrees, perfect for routers with a 43mm collet. This robust and expertly crafted masterpiece combines professional table router technology in a compact format, making it ideal for small workshops or as a versatile addition to your larger table router setup. Trust in genuine craftsmanship "Made in Germany" and benefit from its quick setup and configuration times! Product details:Pivoting router lift from -5 degrees to 50 degrees - the first and only one of its kind! Quality "Made in Germany": construction made of high-quality aluminium and steel. For router motors with 43 mm clamping neck Classic snap-in guide points: 22.5°, 30°, 45° and 90° No loss of routing depth! Easy router bit changing, thanks to upward looking routing spindle and collet chuck Countless routing possibilities: grooves, rebates, chamfers, mitre cuts, and much more - and all this with only one slot routing cutter Height fine adjustment to 1/10mm: extremely precise adjustment, with exact scaling and effective spindle lock, conveniently operated via hexagon socket screw. Smooth-running spindle columns: allow continuous and exact fine height adjustment. Routing without rip fence: 2 drill holes for the rip fence pin enable free routing of e.g. round workpieces without rip fence. Absolutely flat: easy leveling of the RL3.0 using leveling screws in the insert plate. Laser scaling: millimetre scale on the surface for exact alignment of the rip fence.Easy to use:Height adjustment via rotary handle above Angle locking via a lever below Centering in the slotted hole by means of two levers below Additional recessed grip for easy changing of the reduction plates. Magnetism for attaching further accessories is distributed over the entire reduction plate. No own drillings necessary: mounting holes (countersunk head) for quick router table installation are already pre-drilled.Compatible router motors:Kress: 530 FM, 800 FME, 1050 FME Mafell: FM 800, FM 1000 Suhner: UAC 30 RF, UAD 25 RF, UAK 30 RF, UAL 23 RF Note: Not compatible with Trend T4EK.If your routing motor is not listed, please check the tolerances of the clamping neck specified by the manufacturer for your model or contact us. Technical data: Dimension insert plate: 306 x 229 x 9 mm Corner radius of insert plate: 6 mm Height adjustment per rotation: 4 mm Max. adjustment travel: 101 mm Height router lift (max. extended): 240mm Max. Router bit diameter: 55 mm Weight: approx. 5 kg Scope of delivery: 1x router lift RL3.0 2x reduction plates slot hole Ø 16 and 32mm 1x reduction plate round hole Ø 68mm 1x hexagon screwdriver 5x150mm 4x fixing screws M6x50, washers and nuts 8x leveling screws M5x8 1x instruction manual

Reduction plate round RP2.0-10 hole for insert plate IP2.0, router lifts RL2.0 & RL3.0 Technical details: Made of galvanised 2 mm thick steel Ø cutter opening: 10 mmScope of delivery:1x reduction plate: RP2.0-10

Reduction plate RP3.0-54 oblong hole for router lift RL3.0Technical details:Made of galvanised 2 mm thick steel Ø cutter opening: 54 mm Length of oblong hole: 76 mm Scope of delivery:1x reduction plate RP3.0-54

Reduction plate RP2.0-22 round hole for insert plate IP2.0 and router lifts RL2.0 & RL3.0 The galvanized reduction plate RP2.0-22 enables precise work for maximum accuracy.Technical details: Made of galvanised 2 mm thick steel Ø cutter opening: 22 mmScope of delivery:1x reduction plate RP2.0-22

Reduction plate RP3.0-32 oblong hole for router lift RL3.0The galvanized reduction plate RP3.0-32 for the swivel router lift RL3.0 enables precise work for maximum accuracy.Technical details:Made of galvanised 2 mm thick steel Ø cutter opening: 32 mm Length of oblong hole: 64 mmScope of delivery:1x reduction plate RP3.0-32

Reduction plate set RL2.0-SET-1 for insert plate IP2.0 and router lifts RL2.0 & RL3.0This set reduction plates allows precise alignment of the router bit with the table opening, prevents  smaller workpieces from tilting, enhances dust extraction by minimizing gaps, and ensures maximum stability with magnetic hold. Technical details: Made of galvanised 2 mm thick steel Scope of delivery:1x reduction plate set RP2.0-SET-1: 10, 16, 54 and 98 mm

Reduction plate RP3.0-42 oblong hole for router lift RL3.0The galvanized reduction plate RP3.0-42 for the swivel router lift RL3.0 enables precise work for maximum accuracy.Technical details:Made of galvanised 2 mm thick steel Ø cutter opening: 42 mm Length of oblong hole: 70 mmScope of delivery:1x reduction plate RP3.0-42

Reduction plate RP3.0-22 oblong hole for router lift RL3.0 The galvanized reduction plate RP3.0-22 for the swivel router lift RL3.0 enables precise work for maximum accuracy.Product details :Made of galvanised 2 mm thick steel Ø cutter opening: 22 mm Length of the oblong hole: 60 mmScope of delivery: 1x reduction plate RP3.0-22

Reduction plate RP2.0-16 round hole for insert plate IP2.0 and router lifts RL2.0 & RL3.0 The galvanized reduction plate RP2.0-16 enables precise work for maximum accuracy.Technical details: Made of galvanised 2 mm thick steel Ø cutter opening: 16 mmScope of delivery:1x reduction plate RP2.0-16

Reduction plate RP2.0-68 round hole for insert plate IP2.0 and router lifts RL2.0 & RL3.0 The galvanized reduction plate RP2.0-68 enables precise work for maximum accuracy.Technische details: Made of galvanised 2 mm thick steel Ø cutter opening: 68 mmScope of delivery:1x reduction plate RP2.0-68

Reduction plate RP2.0-54 round hole for insert plate IP2.0, router lift RL2.0 & RL3.0 The galvanized reduction plate RP2.0-10 enables precise work for maximum accuracy.Product details: Made of galvanised 2 mm thick steel Ø cutter opening: 54 mmScope of delivery:1x reduction plate RP2.0-54

Reduction plate RP2.0-42 round hole for insert plate IP2.0 and router lifts RL2.0 & RL3.0 The galvanized reduction plate RP2.0-42 enables precise work for maximum accuracy.Technical details: Made of galvanised 2 mm thick steel Ø cutter opening: 42 mmScope of delivery:1x reduction plate RP2.0-42

Reduction plate round hole for insert plate IP2.0 and router lifts RL2.0 & RL3.0 The galvanized reduction plate RP2.0-86 enables precise work for maximum accuracy.Technical details: Made of galvanised 2 mm thick steel Ø cutter opening: 86 mmScope of delivery:1x reduction plate RP2.0-86

Reduction plate RP3.0-16 oblong hole for router lift RL3.0The galvanized reduction plate RP3.0-12 for the swivel router lift RL3.0 enables precise work for maximum accuracy.Technical details: Made of galvanised 2 mm thick steel Ø cutter opening: 16 mm Length of oblong hole: 57 mmScope of delivery:1x reduction plate RP3.0-16

Reduction plate RP3.0-12 oblong hole for router lift RL3.0The galvanized reduction plate RP3.0-12 for the swivel router lift RL3.0 enables precise work for maximum accuracy.Technical details: Made of galvanised 2 mm thick steel Ø cutter opening: 12 mm Length of oblong hole: 54 mmScope of delivery: 1x reduction plate RP3.0-12

Reduction plate RP2.0-32 round hole for insert plate IP2.0 and router lifts RL2.0 & RL3.0 The galvanized reduction plate RP2.0-32 enables precise work for maximum accuracy.Technical details: Made of galvanised 2 mm thick steel Ø cutter opening: 32 mmScope of delivery:1x reduction plate RP2.0-32

Reduction plate set RP3.0-SET-ALL for router lift RL3.0 This set reduction plates allows precise alignment of the router bit with the table opening, prevents smaller workpieces from tilting, enhances dust extraction by minimizing gaps, and ensures maximum stability with magnetic hold.Technical details: Made of galvanised 2 mm thick steel Cutter openings slot hole 12, 22, 42, 54, 68 mm Cutter opening : Ø 32 mm Scope of delivery: 1x RP3.0-SET-ALL

Reduction plate RP2.0-98 round hole for insert plate IP2.0, router lift RL2.0 & RL3.0The galvanized reduction plate RP2.0-98 enables precise work for maximum accuracy.Product details: Made of galvanised 2 mm thick steel Ø cutter opening: 98 mmScope of delivery:1x reduction plate RP2.0-98

Reduction plate for insert plate IP2.0 and router lift RL 2.0 and 3.0Product details:Made of galvanised 2 mm thick steel Ø Cutter opening: undrilled (for self-drilling or closing the table top)Scope of delivery:1x reduction plate undrilled

Reduction plate RP3.0-68 oblong hole for router lift RL3.0The galvanized reduction plate RP3.0-68 for the swivel router lift RL3.0 enables precise work for maximum accuracy.Product details:Made of galvanised 2 mm thick steel Ø cutter opening: 68 mm Length of oblong hole: 82 mmDelivery Includes:1x reduction plate RP3.0-68